top of page

OPTIC PATTERNS

This list is only for referencing what footprints various optics use. Refer to the specific product description for the service you are purchasing to ensure you place the correct order for the optic you will be using.  

​

  • Trijicon RMR​

    • ​Trijicon: RMR, SRO​​

    • Holosun: 407c, 507c, 508t​, 507 Comp

    • Sig Romeo Zero R

    • Swampfox: Liberty and Justice

    • Riton PRD Series

  • Shield RMSc/RMS

    • Shield: RMS, RMSc, RMSx, RMSw​

    • Holosun: 507k, 407k, EPS, EPS Carry

    • Sig: Romeo Zero, Romeo Zero ELITE

    • Swampfox Sentinel

    • Riton MPRD Series

    • Primary Arms Classic 21mm

    • Salvo Optics SRC

    • Vortex Defender CCW

  • Docter Pattern

    • Vortex Venom​

    • Burris Fastfire 3

  • Leupold Deltapoint Pro

    • Leupold Deltapoint Pro​

    • Sig Romeo Zero Pro, Romeo 1 Pro

​

UNIQUE FOOTPRINTS NOT SHARED WITH OTHER OPTICS

​

  • Aimpoint ACRO P1 & P2​

  • Vortex Viper

  • Steiner MPS

  • Holosun 509T

  • Trijicon RMRcc

  • Primary Arms 509T ACSS

​

WE DO NOT MACHINE FOR CRIMSON TRACE, ADE, OR COUNTERFEIT OPTICS.

SIG P320 RMSc/507K Optic Cut

SIG P320 RMSc/507K Optic Cut

SKU: P320-507K-RDT
This is for the machining and installation of an RMSc pattern optic (including the Holosun 507K and it's varients) on the Sig Sauer P320 slide. This EXCLUDES optic ready models (i.e. pro cut slides, X5 Legion, AXG, etc...).
 
Please also note that early model slides with the weight reduction slots under the rear of the slide are not eligible for machining. If you would like to know if your slide is eligible for machining, email us a picture of the bottom of your slide and we can let you know if there are any issues. 
 
Please read all points below:
 
  • Two optic depths are available. The .105" depth will require suppressor sights to cowitness through the optic but will have a lower 1/4 cowitness with the suggested sights listed below. The .190" depth is only applicable for Shield and Holosun optics and will provide a "low witness" where the OEM sights will sit at the lower 1/6 in the optic window.  
  • Price does not include refinishing. Stainless steel slides will recieve a coating of LPS3 to the optic pocket.
  • Cerakote can be added to your order HERE
  • Optic will be mounted in front of the factory rear iron sight.
  • It is REQUIRED that the optic be supplied with the slide for machining and installation. We measure and fit EACH optic to each slide we install them on. We do this to ensure the most secure installation possible. 
  • You are responsible for shipping cost. The Shipping added at checkout covers the cost of shipping back to you via USPS. Shipping includes $800 in insurance coverage.
  • Current leadtimes are located at the top of the webpage.
  • THIS IS FOR THE MACHINE WORK FOR THE OPTIC INSTALLATION ONLY!!! The optic is not included!

  • Recommended Iron Sights

    For the .105" optic pocket depth we suggest the following iron sights:

    • Dawson Precision .285" rear available HERE
    • Dawson Precision .290" front available HERE
$89.99Price
No Reviews YetShare your thoughts. Be the first to leave a review.
Add Cerakote To Your Order

Add Cerakote To Your Order

$60.00Price
bottom of page